F-5 Protective Solvent

This product is a solvent-based stone protective solvent, with excellent oil, water, weather resistance, anti-fouling properties, such as edible oil, oil, juice, coffee, wine and other very effective.

Розничная цена

0.0

元

Рыночная цена

0.0

元

Количество просмотров :

1000

Товарный код

Количество

Наличие на складе :

Подкатегория

Вернуться к списку



资质文件服务保障

Product description

Параметры

　　Product introduction: This product is a solvent-based stone protective solvent, with excellent oil, water, weather resistance, anti-fouling properties, such as edible oil, oil, juice, coffee, wine and other very effective.

　　Range Of Application: All base materials can be used, such as granite, marble, limestone, cement floor, ceramic tile, artificial stone, etc.

　　Features:

　　1. This product is fluorosilane solvent-based product;

　　2. F-5 organic fluorine full-effect stone material protective solvent is solvent-based product with strong permeability, which can effectively penetrate into the interior of the substrate to achieve the best protective effect without leaving any trace on the surface and without changing the color of the stone. It has excellent chemical resistance, aging resistance and weather resistance. Good air permeability, oil proof, waterproof, pollution proof performance, suitable for all kinds of occasions, especially canteen, parking lot and other places easy to be polluted by oil.

　　3. Dosage varies according to different stone materials. In general, smooth stone material is about 10 m²/L and rough stone material is about 5m²/L.

　　Package: 4 L/plastic pot

　　Method Of Application:

　　1. Thoroughly clean the surface of the substrate to ensure that the treated surface is dry and free from dust, oil and other pollutants.

　　2. Roller, brush, sponge, cloth, etc. can be used on the surface of the base material to evenly roll coating, coating, etc., let stand for 10 minutes or so, wipe off the excess residual liquid with the cloth, dry naturally, and maintain for more than 24 hours without water. Depending on different stone varieties, finishes or engineering needs, a second treatment can be performed to enhance the effect.

　　Caution:

　　1. Conduct application test on the surface to be cleaned before use, and use it in a large area without any other influence.

　　2. During the construction, pay attention to the protection of operators, keep the construction site well ventilated and away from sparks, heat sources and open fires. After use, keep the drum and tank sealed to avoid volatilization or mixing with other impurities.

　　3. The product is used in a temperature of 4℃ or above. In case of condensation and deposition at low temperature, please use warm water bath to melt it and stir it until it is uniform and transparent. It will not affect the performance of the product.

　　4. Do not mix water with the protective solvent. If you do, the product can not be used.

Ключевые слова:

protective

the

and

stone

product

Для просмотра сканируйте QR-код с помощью мобильного телефона